Check Engine Light Flashing, Then Solid

Check Engine Light Flashing Then Solid – Causes And Fixes

As you drive, your dashboard’s check engine light blinks. The Check Engine Light may be flashing in some situations due to difficulty identifying an issue with your car, and flashing engine lights when speeding is typical for many drivers. But you might be thinking, what makes the check engine light flashing, then solid out of nowhere? It can occur from several factors, and in this article, we’ll talk about several possible causes of engine lights flashing when accelerating.

What Does The Flashing Check Engine Light Mean?

An engine misfire and a severe potential problem are both indicated by a check engine light flashing, then solid. Your engine will suffer more significant harm the more miles you drive with a flashing check engine light. As quickly as possible, have a mechanic to check it!

While driving, the engine’s control unit keep tabs on all the sensors in your vehicle. This data determines how much fuel needs to get pumped into the engine at whatever angle the ignition should get fired.

A difficulty code will get generated if a sensor’s value is incorrect for a brief period.

Your dashboard’s check engine light will turn on if the engine’s control unit repeatedly receives the incorrect result from the sensor.

The engine light will begin to flicker instead if the misfire is severe. It is to let you know that there is currently an issue that might harm the catalytic converter.

Common Causes

If your engine light is blinking or flashing, your automobile probably has a problem, and you ought to take it to a repair. It can add oil to the car, or it might require replacing the spark plugs, which is a more complicated issue.

This noise may have several reasons, which may be trivial or significant. Investigate the potential causes of these minor troubles to prevent them from developing into more critical issues. The engine light frequently flashes as a result of:

  • Gap Cap Loose Or Faulty

Your car’s gas may leak if the gas cap is damaged, defective, or loose. It cause your engine no longer operating correctly. The top portion of the fuel line may be the source of a more significant issue.

Examine the area for any gas leaks if the issue persists. After that, examine if the gas cap can be tightened or replaced. After some time spent driving, the engine light ought to go. If not, it could be time to consult your technician.

  • Faulty Catalytic Converter

Your car contains a catalytic converter in the exhaust system that lowers emissions. It changes poisonous fumes like carbon monoxide into less dangerous by-products.

Most automobiles need catalytic converters, often expensive auto parts that cost between $500 and $1,000 apiece. In some cars, there are even four of them! If they break down, you’ll have to buy more petrol, and your vehicle won’t perform as well.

  • Faulty Charging System

Your car’s problems could not just get limited to the battery. A dead engine might also result from an alternator or other electrical component not charging correctly. To prevent any problems affecting the charging system, keep a watch on this region.

  • Mass Airflow Sensor

The mass air flow sensor detects the air entering your engine. It is to guarantee that there is sufficient air for fuel. Your automobile won’t start, or it might stall if there is not enough air.

The computer will get a signal if the airflow sensor in your engine stops functioning, indicating a problem. The cause of the Check Engine indicator turning on.

  • The Engine Has Not Warmed Up

The car, which has to get shut all day, is possibly just taking more time to switch on and work. If this is the case, the engine might only need to get warmed up before driving.

Try driving at 90 km/h or 55 mph for around 15 minutes if the check engine light starts flashing after you start the engine. It will warm the sensors more quickly than simply turning the car on.

It’s also typical for the Check Engine light to remain illuminated while driving. Consult your car’s owner’s manual for advice if your Engine Light is on but flashing, or visit the dealership for professional help on what’s wrong with your vehicle.

  • Faulty Oxygen Sensor

A part called the oxygen sensor derives its information from how much oxygen is present in the engine’s exhaust. The Check Engine Light will blink if the oxygen level is low.

There are many potential causes for this, one of which is problems with the O2 Sensors. If you see the Check Engine Light flickering on your dashboard, make sure to have it thoroughly examined by a professional.

  • Faulty Ignition Coils

The ignition system of your car includes the ignition coil. To cause the starter motor to ignite the engine’s air-fuel combination, it transforms the voltage to the required volts.

The check engine light will illuminate if the ignition coil is defective. If you decide to replace it, be sure to have a qualified professional inspect the complete system.

What Does Check Engine Light Flashing, Then Solid Mean?

Check engine light flashing, then solid often indicates that the Engine Light light was illuminated and turned off. The engine light often turns off because you deactivated it with the key and clicked the reset button.

If not, there can be an issue with your fuel supply or ignition systems, or other sensors. To be sure of the issue, you must get it diagnosed by a trained technician.

Final Thought

One of the numerous possible causes of this is the O2 Sensors’ issues. Make sure to check it out by a technician as soon as you see the Check Engine Light blinking on your dashboard.

Continue Exploring: More Articles to Keep You Engaged

Similar Posts


Leave a Reply

Your email address will not be published. Required fields are marked *